Hi-Tek Supercoat Bullets greatly reduce the amount of smoke normally associated with cast wax bullets
Lead fouling of the bore is drastically reduced or in most cases, eliminated completely
Hi-Tek Supercoated bullets gives off no toxins or particulate matter when fired
The Hi-Tek coating is 100% non abrasive and contains no PTFE or Moly
Hi-Tek Supercoated bullets are completely safe to use in Glocks polygonal rifled barrels
No wax lube to gum up your loading dies, and they run smoothly in most bullet feeders
The Hi-Tek coating greatly minimizes your exposure to lead
The Hi-Tek coating provides cleaner air, cleaner hands, cleaner reloading equipment and cleaner guns
Load the coated bullets the same way you would a lead bullet, with lead data.

Be sure that you have enough flare on the case mouth when seating the bullet or the coating may be scraped off, causing performance issues.

Also be sure you are not over-crimping as this will cause accuracy and leading issues.

Dirty / leaded barrels can be attributed to powders with fast and or hot burn rates. It’s recommended to use powders with slow burn rates.
Alliant Sport Pistol is inexpensive, readily available example of a powder made specifically for coated bullets